TEC7 X-Tack Grab Sealant White

Code: TEC7XTACK


Out of Stock



 Features

  • TEC7 is the first choice for 80% of all applications.
  • TEC7 replaces assembly adhesive, wood glue, PU glue, silicone mastics, acrylate sealants.
  • Processing temperature: from +5°C to +40°C. Apply to clean, dust and grease-free substrate.
  • If necessary, clean with Tec7 Cleaner or Multiclean.
  • Apply with manual or air caulking gun (best with telescopic plunger).
  • Due to the wide variety of different plastic materials and compositions, as well as materials that are prone to stress cracking, preliminary trials are recommended.
  • Test the adhesion to plastics, powder coatings, exotic woods and bituminous materials.
  • Start by strengthening weak and/or porous substrates with Fixprimer.
  • Due to the diversity of varnishes and paints on the market we recommend preliminary tests.
  • Using products based on alkyd resins may delay the drying process.
  • Use Tec7 Cleaner to clean and degrease safely, obtain the perfect finish, and to remove uncured Tec7 polymers.
  • Use HP Clean to finish porous materials.
  • When glueing mirrors in sanitary facilities only apply vertical strips of adhesive to avoid stagnant moisture due to condensation.
  • Ideal adhesive thickness for optimal adhesion strength: 3 mm.
  • Tec7 has lower adhesion on PP, PE, bitumen and silicones.


Sign up for our newsletter

We only use your email address to add you to our mailing list for receiving our newsletters(monthly). This information is only kept in our mailing list and not for any other purposes than for contacting you with our newsletters.

Thank you for signing up to the newsletter